Mill-Max Early Engagement Receptacles
January 3, 2020
The latest receptacles designed by Mill-Max features minimal insertion length contact which allows for shorter mating leads. These receptacles accept lead diameters from .037” – .043” with a minimum mating lead length of .058” for top entry insertion. This is a 30% reduction in required lead length from the current receptacle offerings. The reduction is due to the hourglass design and extended contact surface area, eliminating the need for excess protrusion through its fingers for reliable electrical contact. The ability to use shorter mating pins provides several advantages such as compressed packaging, shorter electrical signal paths and lower potential RF signal interference.
Learn more about the new Receptacles from Mill-Max here.
YOU MAY BE INTERESTED IN…
High Power and Low Loss Type N Coax Connectors, Operating up to 4 GHz
August 5, 2021
Cinch Connectivity Solutions, a Bel Fuse Inc. company, announces the expansion of the Type N Connectors with four straight cabled and crimp type configurations operating to 4 GHz. Type N Connectors are typically used where high power and high-performance requirements are both required. These connectors have a rugged brass construction and nickel finish, intended…
Pickering Series 104 High Voltage SIL/SIP Reed Relays
January 28, 2022
Reed relay company Pickering Electronics has increased the stand-off voltage values for its prevalent small-size Series 104 high voltage reed relays for up to 4kV. This is a 1,000VDC stand-off voltage improvement from the previous Series 104 reed relay product offering. The new Series 104 has reed relays which are suitable for applications that involve high…
Johnson 2.92mm, 40 GHz Test Cable Assemblies
April 10, 2020
The Johnson™ 2.92mm to 2.92mm 40 GHz Test Cable Assemblies allow connectivity in test and measurement/engineering labs and manufacturing environments. HP160S Cable from Semflex is a high performance, low lost cable offering superior performance with a 2.92mm 40 GHz precision straight connector. The Test Cable Assemblies are available in both imperial and metric lengths, and…
Flat and Pointed Tip Spring-Loaded Pins and Connectors
June 21, 2023
Mill-Max has just announced a new lineup of spring-loaded pins available with either pointed or flat tip plungers. These new pins further expands the extensive offering of spring-loaded products, providing solutions for testing and other specialized connection requirements. Responding to designers needs for new and varied spring-loaded interconnect solutions, Mill-Max has expanded its spring-loaded product…
Johnson 2.92mm 45 degrees PCB Mount SMA Connectors
May 15, 2020
Cinch Connectivity Solutions’ Johnson 2.92mm series expands their product offerings to include a new 45° connector. This connector is uniquely designed for quick and easy mounting in tight spaces, where height or board edge can be restrictive and an angled design is preferred. Cinch Connectivity Solutions’ 2.92mm 45° PCB Mount Connector offers maximum VSWR…